Search found 31 matches

it a complete bolt on
think all you need are some exhurtst manfold gasgets
welcome to come and have look
was going to fit them to my bros gtr but a change of plan we dont need them any more
so i was told they came of a demo skyline which ran 750bhp with them they have never been on the road just on a dyno

Hello every one,

I need to sell some bits I have so I can pay for collage next year it’s going to a good cause.
I have an e-manage blue and e-01 I never installed either unit as change of plans. The e-manage blue is exactly how I got it from import company in box basically brand new but had a base map for my 323 so that will need to be changed.

The e-01 on the other had I left at my mate house the night he had a party and some bits went missing witch he also tried to repair I have taken it to electrician check everything still works and they say it dose. I did install this for a mouth on my 323 before other things came up. The parts missing are as follows:

· The plug for the valve input but wires are there
· The signal wire went missing there cheep from any e-manage deanships
· The boost valve power wire was broken and mate tried to fix was a bit shoddy but should still work

Now onto the next bit of sale the defi’s gauges I had these some time back decided I didn’t wan ...

Ok, where to start, I have had an amazing experience owning this car.. it has the legendary bullet proof B16a2 engine. its my 2nd EG so I know them pretty well. I am upgrading now to a JDM DC2. Ok ill start with the basics. The car is a 92 on a J plate, its a black UK Spec EG6 with a few modifications. It is now on 108k and I have not once had a single problem engine wise. I have always changed the oil every 3k and have also changed the cambelt since owning it. It has a few bad points and good points. Firstly I would like to add it was involved in an accident. This has now been repaired. It was hit on the front left side as some idiot person tried to do a uturn from the left lane and cut in front of me. the car is great and runs fine. The following specs are of the car. Road Tax for another 6 months, and MOT at the end of the year I think roughly October time, I haven’t had time to check the exact date as im at work. It is a fast car, and has a very pronounced VTEC change over due t ...

Afternoon peeps

Up for sale is my NISMO catback - from my R33 GTST (believe it fits others)

In over all great condition. As my cars actually raised (yes correct Ghey

) the only damage is a few light scratchs on the underneath (front silencer) which only grovlers and mechanics would ever see Very Happy

Pics and vid for sound below - sounds quiet but if you work out the volume of my voice for actual talking volume you'll get there (long way of saying turn the volume up Very Happy

)

I have only found 2 others like this before one of which was in sweeden.

Asking £400 - rather collect as it'll be difficult to pack, but would "guess" around £30-£40 delivered with loads of bubble wrap and some card lining.

Sorry the japspeed isn't for sale Very Happy

http://i81.photobucket.com/albums/j221/speedingpanther/Skyline/s2/th_24022008601.jpghttp://i81.photobucket.com/albums/j221/speedingpanther/Skyline/s2/th_24022008599.jpghttp://i81.photobucket.com/albums/j221/speedingpanther/Skyline/s2/ ...

I just dont have the time to use it! i have driven it about once a week for the last few months ive had it so have put hardly any miles on it.

Spec;

Avo adjustable coilovers
OZ superleggras not a scrtach on them :0
front upper strut brace
rear upper strut brace
DC sports oil cap
Red rocker cover
Vector induction kit
clanny ecu - so lower vtec 5200 and launch control
Manifold (dont know what make)
Scorpian twin tip exhaust
daz's home made de-cat so basicly a bit of pipe nout inside it
bucket seats
sabelt harness's
320mm ebay steering wheel
Cd player bit funky only likes certain cd's
mango sunroof so no rust! is a bit slow though

Its had a full re-spray so not a ounce of rust on it that i can see.

When i bought it there was new front brakes fitted so probably in total they have done about 1300 miles

Has only got 119k on the clock
loads and loads of paper work to go with all the little bits and pieces

plus there are loads of little ...

Came off my car back in May, Andy has shown me that the flange is warped, only by 1mm but it's enough to lose pressure. Even with a gasket it couldn't quite block it up, hence the 2835 that's on my car now Very Happy

I can't be assed to try and sell it properly because of this issue.

I'm sure there's someone out there that can sort the flange out by filing it down.

a bargain @ £15 Thumbs Up!

if no one wants it from SJC, it's going in the bin.

1 x st205 cylinder head, covered about 60k complete with cams, pulleys, shims etc, this head was very very quite and came from a well looked after car, i had got it with the intention of having it reworked and cammed up but i've called a halt to my gt4 tuning due to the impending arrival of a new car

1 x st205 block complete with crank only, this came from my car due to piston ringland failure, the bores are still immaculate with no scoring or lips, inspection welcome

1 x st205 block complete with crank and pistons, sump, oil + water pump, oil cooler, basically everything but the head, no known faults, had bought this to replace my blown engine before going the forged route, (may do a deal for this and the head to make a complete engine)

1 x toyota oil pump had covered approx 6k miles

1 x toyota water pump had covered approx 6k miles

1 x xspower lagged downpipe, had this on my car for 3 months, no problems at all with fitting etc, comes with turbo to dp gasket

st ...

I am selling a sony 10 disc autochanger complete with all the leads and fully working (came from my wagon) £30 Thumbs Up!

The red bit is actually Re-Amemiya decals. Came in like that when it was imported from Re-Amemiya.

Will get better pics and post them mate

Time has come to sell up due to trying to get a house and cant afford both the scoob and a mortgage at the mo

Im the 3rd uk owner since imported in 2000 and have a fair bit of paperwork for the car. Even got the boat ticket she came over with.
Fully derestricted and clocks converted to mph.
Mileage at 94k

1995 Subaru Impreza WRX

ENGINE
IHI VF24 ball bearing turbo with 1.2bar actuator
Running 1.3bar
Magnex down pipe
Magnex de-cat straight through centre section
Magnex 6x4 inch oval back box
Apexi induction kit
HKS SSQV
Hybrid FMIC
Fuel lab fuel reg (3.5bar pressure)
Apexi power FC with commander
440cc injectors with adaptor kit
Exedy organic clutch
Lighten flywheel
Blitz electronic boost controller
HKS turbo timer
New coil packs
New recon gearbox just fitted

CHASSIS
Bilstein 40mm lower springs and shocks
17inch buddy club alloys
4 pot callipers on front

INTERIOR
Boost guage
Red leather re-trim on front seats, door cards
Nardi steering wheel
C ...

Accepting Offers in cash, or part ex swaps.....
Just email me, will reply asap!!

Awesome Modified Show Car
Mazda RX7 Twin Turbo

The Car:

- 1993/K reg, RX7 Type R2 model, lighter than most models.
- Imported 2003.
- HPi clear, with certificate.

EXTERIOR:

- Re-Amemiya front bumper with centre meshed and IPF lower spotlights
- Re-Amemiya sideskirts with vents meshed
- Rear bumper with Re-Amemiya lower spats
- Re-Amemiya Fibreglass vented bonnet, very rare!
- Re-Amemiya VERY RARE dual headlights
- Repainted in stunning Candy cherry red this looks anything from red to copper to orange, depending on light. (spotless). Done 18 months ago, also coated in 5 yr guarantee supaguard wax protector!
(slight scratches on rear bumper,and one or two on bonnet,not that bad)
-De-spoilered boot. Looks stunning and smooth!
- Carbon Covered door handles
- Wheels are 17" Wolfrace Asia Tec Katanas (as new) ET 40, 7J width, wrapped in very good Goodyear Ea ...

Also have a couple of ally gt type boot spoilers that came with my gtst £25 each

No idea Andy ,centre bit is shiny ally Thumbs Up!

At one point it had a cusco sticker on it but it came off when i polished it so it an unknown make.
Pm me your email and i'll send youa pic Thumbs Up!

I Have a set of Tein adjustable suspension.

Not sure how much their worth and couldn't say how hard they are - but would look better wih a re-paint if thats your thing.

They had been previously fitted to my 94 GTS-T which I just bought and came with it. I was thinking of fitting them back on but now decided that the standard ones give a nice firm feel already (some will disagree i'm sure - but each to their own).

I have added a couple of pics below.

http://i81.photobucket.com/albums/j221/speedingpanther/parts/car/b6a769fd.jpg
http://i81.photobucket.com/albums/j221/speedingpanther/parts/car/68a25349.jpg
http://i81.photobucket.com/albums/j221/speedingpanther/parts/car/5f056747.jpg
http://i81.photobucket.com/albums/j221/speedingpanther/parts/car/4f6179d8.jpg

PM if your interested

Hey was looking through pistonheads and came across a guy with a silver supra that wants an aero top supra.

http://www.pistonheads.com/sales/171362.htm